Philips Vortex Flow Meter F-2200 Series Manual De Usuario

F-2200 Series Vortex Flow Meter Installation and Operation Guide • Revised 12/08

18 

 

When the power is applied to the F-2000 series vortex meter, alphanumeric characters will appear 

 

on the display. Initially, the meter will operate in a “TEST” mode where self diagnostic checks are 

 

performed on the pre-amplifi er and sensor circuits. Following this, confi guration data is loaded 

 

from the non-volatile memory and the program advances to the measurement mode.

! 

i 

i 

 

In the measurement mode, the display 

 

indicates real-time fl ow, temperature and/

 

or pressure data in the appropriate units. 

 

The top line of the display indicates the 

 

current measured value. The second line 

 

of the display indicates the programmed 

 

units of measurement. 

 

There are two options for displaying data in 

 

the measurement mode. The display may 

 

be set to automatically scroll through each 

 

menu page or it may be set to manually step 

 

through the menu pages using the up arrow 

 

key to advance each page. Displays operating 

 

in the cyclic mode will advance through 

 

each page every 6 seconds.

When measuring steam fl ow, condensate may form on the cool surfaces of the meter and piping 

system when the system is started up for the fi rst time (causing faulty measurement).