Philips Vortex Flow Meter F-2200 Series Manual De Usuario

F-2200 Series Vortex Flow Meter Installation and Operation Guide • Revised 12/08

7 

We, at ONICON INCORPORATED, would like to thank you for purchasing our F-2200 Series Vortex Flow 
Meter. As our valued customer, our commitment to you is to provide fast reliable service and assistance, 
while continuing to offer you new products to meet your growing fl ow measurement needs.

 

The purpose of this guide is to provide installation and commissioning procedures and basic 

 

operating and servicing instructions for ONICON F-2200 Series Vortex Flow Meters.

 

ONICON F-2000 series vortex fl ow meters utilize Karman’s vortex street principal  to detect changes 

 

in velocity in the medium fl owing around the titanium shedder bar and through the meter body. A 

 volumetric 

fl ow rate is then derived by utilizing the known cross-sectional area of the meter body 

 

and the average velocity of the medium. When provided with optional temperature and/or pressure 

 

compensation the F-2000 series fl ow meters are capable of calculating the required density 

 

corrections necessary to provide direct mass fl ow measurement of liquids, steam or gases.

CONSTRUCTION 
 

Meter body: 

 

 

Casting: 316 stainless steel for diameters up to 4”    

 

 

 

304 stainless steel for 6” and 8” diameters 

 

 

Shedder bar:  Unalloyed titanium 

 

 

Shedder bar seal:  Ni plated Inconnel 

 

 

Damper pin o-ring:     

 

 

 

Viton for, non-steam, -4° to 356° F     

 

 

 

Kalrez 4079 for, non-steam, -4° to 428° F     

    

Parofl uor for steam, -4° to 464° F   

 

 

 

Enclosure material: Die-cast aluminum 

 

 

Enclosure viewing window: Tempered glass, 

 

 

 

UV blocking  

CALIBRATION 
 

Each meter undergoes a 5 point velocity calibration 

 

from 0-250 ft/sec  

PROGRAMMING 
 

Each meter is programmed at the factory based on application specifi c data provided by the 

 

customer. Field re-programmable via keypad, with coded access for security. 

! 

Only qualifi ed service personnel should attempt to install or service this equipment. Serious injury 

may result from the improper installation or use of this equipment.