Juniper Networks SRX 210 Manual De Usuario

Related Topics

■

■

■

■

■

■

Preparing the SRX210 Services Gateway for Desk-Mount Installation

You can mount an SRX210 Services Gateway on a desk or other level surface
horizontally or vertically. The four rubber feet attached to the chassis provide stability.

Table 29 on page 67 provides the list of tasks you need to perform before installing
the device.

Table 29: SRX210 Services Gateway Preinstallation Checklist for Desk-Mount
Installation

Additional Information

Task

Verify that the site meets the requirements.

Place the desk in its permanent location, allowing
adequate clearance for airflow and maintenance,
and secure it to the building structure.

Remove the services gateway chassis from the
shipping carton.

Verify that you have the following parts available in
your desk-mounting kit to mount the SRX210
Services Gateway vertically:

■

Vertical stand

■

Screws

NOTE: If you are mounting the services gateway horizontally on a desk, ensure that
the chassis is attached with the rubber feet.

NOTE: The vertical desk-mounting kit is not shipped with the device and must be
ordered separately.

Preparing the SRX210 Services Gateway for Desk-Mount Installation

■

67

Chapter 11:  Preparing the SRX210 Services Gateway for Installation