Juniper Networks SRX 210 Manual De Usuario
Related Topics
■
■
Clearance Requirements for Airflow and Hardware Maintenance of the SRX210
Services Gateway on page 54
Services Gateway on page 54
■
■
■
Preparing the SRX210 Services Gateway for Wall-Mount Installation
You can mount an SRX210 Services Gateway on a wall. The four rubber feet attached
to the chassis provide stability.
to the chassis provide stability.
Table 30 on page 68 provides the list of tasks you need to perform before installing
the device.
the device.
Table 30: SRX210 Services Gateway Preinstallation Checklist for Wall-Mount
Installation
Installation
Additional Information
Task
Verify that the site meets the requirements.
Remove the services gateway chassis from the
shipping carton.
shipping carton.
Verify that you have the following parts available in
your wall-mounting kit to mount the SRX210 Services
Gateway on wall:
your wall-mounting kit to mount the SRX210 Services
Gateway on wall:
■
Wall-mounting brackets
■
Screws
NOTE: The wall-mounting kit is not shipped with the device and must be ordered
separately.
separately.
Related Topics
■
■
■
■
68
■
Preparing the SRX210 Services Gateway for Wall-Mount Installation
SRX210 Services Gateway Hardware Guide