HP E1368A Manual De Usuario
ARM
The
ARM
subsystem selects the number of scanning cycles (1 through
32767) for each
INITiate
command.
ARM
:COUNt <
number
> MIN | MAX
:COUNt? [MIN | MAX]
:COUNt
ARM:COUNt <
number
> MIN | MAX
allows scanning cycles to occur a
multiple of times (1 to 32767) with one
INITiate
command when
INITiate:CONTinuous OFF | 0
is set.
MIN
sets 1 cycle and
MAX
sets 32,767
cycles.
Parameters
Parameter Name
Parameter Type
Range of Values
Default Value
number
numeric
1 - 32767 | MIN | MAX
1
Comments
•
Number of Scans: Use only numeric values between 1 and 32767
for the number of scanning cycles (default is 1).
for the number of scanning cycles (default is 1).
•
Related Commands:
ABORt
,
INITiate:IMMediate
•
*RST Condition:
ARM:COUNt 1
Example
Setting Ten Scanning Cycles
This example sets a Microwave Switch for 10 scans of channels 00 through
02. When the scan sequence completes, channels 00 through 02 (switches
00 through 02) are closed.
02. When the scan sequence completes, channels 00 through 02 (switches
00 through 02) are closed.
ARM:COUN 10
Set 10 scans per INIT command.
SCAN (@100:102)
Scan channels 00-02.
INIT
Start scan, close channel 00.
Chapter 4
HP E1368A/69A/70A Command Reference 51