Agilent Technologies Water Heater E4350B Manual De Usuario
72 Language Dictionary
DISP:TEXT
Sends character strings to the display when the display mode is TEXT. The LCD display has the following character set:
LCD Character Set
uppercase letters
A through Z (Case-sensitive entry)
digits
0 through 9
punctuation
_ | “ $ < > + - / = ? . : ,
blank space
A display is capable of showing up to 12 characters. However, the three punctuation characters do not count toward the 12-
character limit when they are preceded by an alphanumeric character. When punctuation characters are included, then the
maximum number of characters (alphanumeric + punctuation) that can be displayed is 15. If it exceeds the display capacity,
a message will be truncated to fit and no error message will be generated. If any character in the message is not a member
of the above character set, the character will be displayed as a starburst (all 16 segments of the character are lit).
character limit when they are preceded by an alphanumeric character. When punctuation characters are included, then the
maximum number of characters (alphanumeric + punctuation) that can be displayed is 15. If it exceeds the display capacity,
a message will be truncated to fit and no error message will be generated. If any character in the message is not a member
of the above character set, the character will be displayed as a starburst (all 16 segments of the character are lit).
Note
IEEE Standard Digital Interface for Programmable Instrumentation requires that a string be enclosed in
either single (‘) or double (") quotes.
either single (‘) or double (") quotes.
Command Syntax
DISPlay[:WINDow]:TEXT [:DATA] <STR>
Parameters
(See LCD character set)
*RST Value
‘ ‘
Examples
DISP:TEXT "DEFAULT_MODE"
Query Syntax
DISPlay[:WINDow]:TEXT?
Returned Parameters
<STR> (Last programmed text string)
Related Commands
DISP DISP:MODE *RST
Measure Subsystem
Measurement commands measure the output voltage and current.
MEAS:CURR?
MEAS:VOLT?
These queries return the voltage and current measured at the Agilent SAS’s sense terminals.
Query Syntax
MEASure:CURRent[:DC]?
MEASure:VOLTage[:DC]?
Parameters
(None)
Default Suffix
A for MEAS:CURR?
V for MEAS:VOLT?
Examples
MEAS:CURR?
MEAS:VOLT?
MEASURE:VOLTAGE:DC? MV
Returned Parameters
<NR3>