Furuno 10n Manual De Usuario
10
1.6 Optional Water Temperature Sensors
Transom mount water temperature sensor T-02MTB
• Fix the cable at a convenient location with cable clamp.
• When the cable is led in through the transom board, make a hole of approx. 17 mm in
• When the cable is led in through the transom board, make a hole of approx. 17 mm in
diameter to pass the connector. After passing the cable, fill the hole with a sealing
compound.
compound.
M5x20
Mount sensor
flush with hull bottom.
flush with hull bottom.
D
D>50cm
Figure 1-14 How to install transom mount water temperature sensor T-02MTB