Furuno 10n Manual De Usuario

 

 

 

The triducer is designed for thru-hull mounting. 
 

When selecting a mounting location keep the following points in mind: 
 
•  Air bubbles and turbulence caused by movement of the boat seriously degrade the 

sounding capability of the transducer. The transducer should, therefore, be located in a 
position where water flow is the smoothest. Noise from the propellers also adversely 
affects performance and the transducer should not be mounted nearby. The lifting 
strakes are notorious for creating acoustic noise, and these must be avoided by keeping 
the transducer inboard of them. 

•  The transducer must always remain submerged, even when the boat is rolling, pitching 

or up on a plane at high speed. 

•  A practical choice would be somewhere between 1/3 and 1/2 of the boat’s length from 

the stern. For planing hulls, a practical location is generally rather far astern, so that the 
transducer is always in water regardless of the planing attitude. 

 

φ

79 mm

133 mm

27 mm

140 mm

7 mm

φ

51 mm

2.00"-12 UN
threads