Fujitsu LT800P Manual De Usuario

6. Perform the following steps.

■

Make sure that [Use Windows to configure my wireless network settings] is checked.

■

Click [Add] under [Preferred networks]. [Wireless Network Properties] appears.

7. Set parameters in accordance with Table 8.

■

For the AdHoc network, specify the same value to all the computers, for which the 
encryption key is used for connection.

■

For the infrastructure network, specify the encryption key (network key) with the 
same value to the encryption key of the access point. For how to check the encryption 

keys set for the access point, refer to the manual supplied with the access point.

Table A-8   Setting parameters

Be sure to specify the encryption keys. If you do not specify the keys, any 
computer with a wireless LAN card can be connected. This presents a risk 
that other users may steal or destroy your data.

Network 
Name SSID

Enter the network name to which you want to connect. This is a 
required item. For the network name, ask your LAN administrator.

 Set the same name for all of the computers that are 

to be connected.

 Specify the same name as that specified on the 

access point that is to be connected. For access point instructions, 
refer to the manual that comes with the access point.

Key Format

Click the down arrow and select the input for the Network key.

ASCII characters

Select this when using ASCII characters for the 
Network Key. Characters that can be used 
follow:

0-9, A-Z, a-z, and _ (underscore)

 To set the key to “ABC12”, input 

“ABC12”.

Hexa-decimal 
characters

Select this when using hexadecimal characters 
for the Network Key. 

Use this if there is a wireless LAN card in the 
network that has the Network Key set to a 
character code. In ’Network Key’, input the same 
value as the other wireless LAN card. 

58-0867-01.book  Page 82  Thursday, February 13, 2003  1:18 PM