Fujitsu LT800P Manual De Usuario

8. When you finish your entry, click [OK]. [Wireless Network Connection 2 Proper-

ties] appears again.

9. Make sure the network name you specified for the SSID in Step 7 is added under 

[Preferred networks].

Network Connection

8

The section describes how to set the network connection for a computer running 
Windows XP.

Network Settings

8

In this section, you set “TCP/IP Settings,” and complete “Checking Computer Name 
and Workgroup” required for the network connection.

TCP/IP Settings

8

1. On [Wireless Network Connection Properties], click [General].

2. Perform the following steps.

■

Click [Internet Protocol (TCP/IP)].

■

Click [Properties]. [Internet Protocol (TCP/IP) Properties] appears.

3. Set an IP address. Ask your network administrator and check the setting.

Table A-9   Setting an IP address

5. Click [OK].

If [Wireless Network Connection 2 Properties] is not displayed, click [Start] 
-> [Settings] -> [Control Panel], and double-click the [Network 
Connection] icon.

Right click the [Wireless Network Connection], and then click [Properties] 
from the menu that appears.

AdHoc Network

Set the IP address and subnet mask. Click [Use the following IP 
address]. Enter a value for [IP address] and [Subnet mask]. See 
“Setting IP Addresses” on page 94 to set IP address and subnet 
mask.

For Infrastructure 
Network

Select [Obtain an IP address automatically]. For the DNS server, 
select [Obtain DNS server address automatically]. For the IP 
address, DNS server, and default gateway, follow the network 
administrator's instructions, if any.

58-0867-01.book  Page 83  Thursday, February 13, 2003  1:18 PM