Fujitsu LT800P Manual De Usuario

6. Close [Network Connection].

Checking the Full Computer Name and Workgroup

9

1. Click [Start] -> [Control Panel]. Make sure the Classic View is selected.

2. Double-click the [System] icon. [System Properties] appears.

3. Click the [Computer Name] tab.

4. Check [Full computer name] and [Workgroup]. Ask your network administrator and 

check the setting.

Table A-10   Setting computer name and workgroup

To change the setting, click [Change], and follow the instructions on the screen. [System 
Properties] appears again.

5. Click [OK]. When a message appears prompting you to restart the computer, click 

[Yes].

Sharing

10

In this section, you set sharing of the drive, folder, and printer.

You need to set this only when you are sharing files or a printer with other computers on 
the network.

When you share a drive, folder, or printer, you can use these from any computer on the 
network.

If you have changed the setting, [Close] is shown instead. Click [Close].

Computer Name

A name to identify the computer on the network. You can specify 
any name to each computer. Use up to 15 single-byte characters. 
For easier identification, use the model name or user name.

Workgroup

A name of the network group. Use up to 15 single-byte 
characters.

Specify the same name to all computers within 

the same network.

Specify workgroup name to connect to.

58-0867-01.book  Page 84  Thursday, February 13, 2003  1:18 PM