Cabletron Systems EMM-E6 Ethernet Manual De Usuario
EMM-E6 User's Guide
B-1
APPENDIX B
EMM-E6 OIDs
This Appendix contains a selected number of OID strings that are among
the most frequently needed. The OIDs are implemented by using either
the SNMP Tools procedures detailed in Chapter 9 or the MIB Navigator
procedures located in Chapter 13. Note that the OIDs can be accessed
using LANVIEW, SPECTRUM, SPMA, or the SNMP element
management packages of other vendors.
the most frequently needed. The OIDs are implemented by using either
the SNMP Tools procedures detailed in Chapter 9 or the MIB Navigator
procedures located in Chapter 13. Note that the OIDs can be accessed
using LANVIEW, SPECTRUM, SPMA, or the SNMP element
management packages of other vendors.
B.1
SPANNING TREE PROTOCOL
The following OID is used to select the desired Spanning Tree Protocol.
ctBridgeStpProtocolSpecification
Description: This object allows the network manager to select
which Spanning Tree Protocol will be operational on the bridge.
The value ‘decLb100’ (2) indicates the DEC LANBridge 100
Spanning Tree Protocol. The value ‘ieee8021d’ (3) indicates the
IEEE 802.1d Spanning Tree Protocol. The value ‘none’ (1)
indicates no Spanning Tree Protocol is operational.
which Spanning Tree Protocol will be operational on the bridge.
The value ‘decLb100’ (2) indicates the DEC LANBridge 100
Spanning Tree Protocol. The value ‘ieee8021d’ (3) indicates the
IEEE 802.1d Spanning Tree Protocol. The value ‘none’ (1)
indicates no Spanning Tree Protocol is operational.
Object Identifier:
1.3.6.1.4.1.52.4.1.2.3.2.1
Data Type:
Integer
Values:
1
None
2
decLb100
3
ieee8021
Access Policy:
read-write
CH1Book Page 1 Wednesday, March 20, 1996 7:48 AM