Cabletron Systems EMM-E6 Ethernet Manual De Usuario

Descargar
Página de 205
APPENDIX B: COMMONLY-USED OIDs
B-2
EMM-E6 User's Guide
B.2
CONFIGURING ARP REQUEST PACKETS
The EMM-E6’s SNMP Tools Screen allows you to generate an Address 
Resolution Protocol (ARP) Request packet utilizing specific framing 
through local management. An ARP Request is used to send an SNMP 
Trap to a destination node that has not yet made or established contact 
with the EMM-E6. This situation may occur when the destination node in 
question has been moved from one port or channel interface of the 
EMM-E6 to another location and has not yet transmitted information 
which would notify the EMM-E6 of its network location. The generation 
of ARP Request packets in such a situation would allow the EMM-E6 to 
locate the reconfigured station without waiting for that station to transmit.
rptrScrAddrMgmtHashType
Description: Forces the EMM-E6 to utilize a specific framing 
type for any ARP Request packet. The values entered determine 
the framing type utilized for the ARP packet. Please note that any 
changes to the framing type to be utilized for ARP requests will 
take effect after the next soft reset of the EMM-E6.
Object Identifier:
1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.8.1
Data Type:
Integer
Values:
2
Ethernet Framing
3
802.3=802.2 w/SNAP Header
Access Policy:
read-write
CH1Book  Page 2  Wednesday, March 20, 1996  7:48 AM