Emerson Process Management 2400S Manuel D’Utilisation

27

When configuring the flow calibration factor:

•

Using ProLink II, enter the concatenated 10-character string exactly as shown, including the 
decimal points. For example, using the Flow Cal value from Figure 6-1, enter 

.

•

Using other methods, you may be required to enter the concatenated value, or you may be 
required to enter the two factors separately, i.e., enter a 6-character string and a 4-character 
string. Include the decimal point in both strings. For example, using the Flow Cal value from 
Figure 6-1:

-

Enter 

 for the flow calibration factor.

-

Enter 

 for the temperature coefficient for flow.

To characterize the flowmeter:

1. See the menu flowcharts in Figure 6-2. 

2. Ensure that the correct sensor type is configured. 

3. Set required parameters, as listed in Table 6-1.