Invacare H112-5 Manuel D’Utilisation

1.

Place the bath board (A) onto a hard, flat 

surface.

2.

Align the handle (B) with the proper mounting 

hole in the bath board.

3.

Press the bath board handle  into the mounting 

holes (C). 

4.

Ensure the handle latches securely into the bath 

board.

5.

Ensure the handle cannot be pulled out of the 

bath board after installation.



The bath board MUST BE installed properly.

ALWAYS install the bath board at least .78 in 

(2 cm) away from tub fixtures.
At least .78 in (2 cm) of the bath board MUST 

hang over the outside of the tub.

Maximum Tub Wall Thickness: .78 in (20 

mm)
Maximum Tub Width: 24.8 in (630 mm)
Minimum Tub Width: 15.5 in (395 mm)
DO NOT use the bath board with tubs that 

have no inner wall.



One mounting hole is round and the 

other mounting hole is square.

B

C

A