Invacare H112-5 Manuel D’Utilisation
4
6.
Twist the mounting pin (D) clockwise to
remove from the mounting peg (E).
7.
Position the mounting pin into the opening in
the slot (F).
8.
Position the mounting peg under the bath
board and onto the mounting pin.
9.
Twist the mounting peg clockwise to secure
it to the mounting pin.
10. Repeat STEPS 4 to 7 for the remaining three
mounting pegs.
11. Turn the bath board over.
12. Twist each mounting peg counterclockwise
12. Twist each mounting peg counterclockwise
to loosen.
13. Slide the mounting pegs towards the middle
of the bath board.
14. Turn the bath board over.
15. Position the bath board in the tub.
16. Slide the mounting pegs towards the ends of
15. Position the bath board in the tub.
16. Slide the mounting pegs towards the ends of
the bath board.
17. Turn the mounting pegs counterclockwise to
secure the bath board in the tub. Torque to
53 in-lb (6 Nm).
18. Insert plugs (G) into the openings in the slots.
E
D
F
6
7-8
12
13
15
16
17
G