Cisco Systems 78-10588-03 Manuel D’Utilisation
Chapter 3
Installing the Chassis
Connecting Power
3-14
Cisco Metro 1500 Series Hardware Installation Guide
78-10588-03
The chassis powers up as soon as the corresponding power switch of the PDU is
turned on.
turned on.
Installing the DC Plug-Socket Combination (European Version)
To connect the power cables for the European version, follow these steps:
Step 1
Connect the desired power cables to power 1 and power 2 on the rear panel of the
Cisco Metro 1500 series system and attach the plugs with the screws to the
sockets. (See Figure 3-7.)
Cisco Metro 1500 series system and attach the plugs with the screws to the
sockets. (See Figure 3-7.)
Figure 3-7
Rear Panel of the Cisco Metro 1500 (DC Version)
Voltage:
Max. Current:
Power Consumption:
Fuse:
Max. Current:
Power Consumption:
Fuse:
For continued protection against risk of fire replace
only with same type and ratings of fuse.
For proper selection of power supply cord refer to
instruction manual.
only with same type and ratings of fuse.
For proper selection of power supply cord refer to
instruction manual.
Made in Germany
March 1998
March 1998
Always remove both
power cords when dis-
connecting from power
source 1.
power cords when dis-
connecting from power
source 1.
!
115/230 V 50/60 Hz
2.5 A
max. 100W
2x T2.5A / 250V
2.5 A
max. 100W
2x T2.5A / 250V
Fan module
DC Power
connectors
Fuse
holders
32268
Fuse 1
Fuse 2
Power 1
Power 2