Cisco Systems 78-10588-03 Manuel D’Utilisation
3-15
Cisco Metro 1500 Series Hardware Installation Guide
78-10588-03
Chapter 3
Installing the Chassis
Connecting Power
Caution
Tighten the screw of the plug to avoid loss of connection.
Step 2
Choose the appropriate power cable.
Step 3
Connect the plug (the power cable for the SELV application is fitted with a special
plug) to the corresponding connector of the PDU. (See Figure 3-8.)
plug) to the corresponding connector of the PDU. (See Figure 3-8.)
Figure 3-8
SELV Application Power Cable
Step 4
Attach the three wires to their respective points in the corresponding connectors
of the PDU as described as follows:
of the PDU as described as follows:
The power cable for the 48 VDC application has wire ferrules on the other end.
(See Figure 3-9.)
(See Figure 3-9.)
50325
Brown wire
life
+
Blue wire
neutral
-
Green/ Yellow wire
ground
PE