Cisco Systems 78-10588-03 Manuel D’Utilisation
3-7
Cisco Metro 1500 Series Hardware Installation Guide
78-10588-03
Chapter 3
Installing the Chassis
Installing the System
Installing the DEMI Module
To install a DEMI module, follow these steps:
Step 1
Remove the acrylic front cover from the unit in which the module should be
added. (See Figure 3-2.)
added. (See Figure 3-2.)
Figure 3-2
DEMI Placement in Extension Chassis A and C
Step 2
Remove the two screws from the blank filler module. Remove the blank filler
panel.
panel.
Step 3
Take the new module from the shipping container and use canned, dry, oil-free,
compressed air to blow off any possible dust particles.
compressed air to blow off any possible dust particles.
Step 4
Insert the DEMI module carefully into the chassis slot while guiding the upper
and lower edges of the module in the tracks until its connectors come into contact
with the backplane connectors.
and lower edges of the module in the tracks until its connectors come into contact
with the backplane connectors.
Caution
It is critical to insert the module gently. If you need a force greater
than 1 lb (4.5 newton) to push in the module, stop immediately.
Inspect the electrical connector. If the connector is not damaged,
repeat Step 4.
than 1 lb (4.5 newton) to push in the module, stop immediately.
Inspect the electrical connector. If the connector is not damaged,
repeat Step 4.
32264
On/Err
Loop
L/R
L/T
R/R
R/T
L/R
L/T
R/R
R/T
On/Err
Loop
L/R
L/T
R/R
R/T
L/R
L/T
R/R
R/T
On/Err
Loop
L/R
L/T
R/R
R/T
L/R
L/T
R/R
R/T
On/Err
Loop
L/R
L/T
R/R
R/T
L/R
L/T
R/R
R/T
On/Err
Loop
L/R
L/T
R/R
R/T
L/R
L/T
R/R
R/T
On/Err
Loop
L/R
L/T
R/R
R/T
L/R
L/T
R/R
R/T
On/Err
Loop
L/R
L/T
R/R
R/T
L/R
L/T
R/R
R/T
On/Err
Loop
L/R
L/T
R/R
R/T
L/R
L/T
R/R
R/T
9/10
E
11/12
13/14
15/16
9/10
11/12
13/14
15/16
E
MUX
Ch.9-16
DMX
Ch.9-16
110/220V AC
OK
FAIL
POWER
FAN
OK
FAIL
110/220V AC
Power
Power
DEMI location
METRO 1500
SERIES