Cisco Systems 78-10588-03 Manuel D’Utilisation
3-9
Cisco Metro 1500 Series Hardware Installation Guide
78-10588-03
Chapter 3
Installing the Chassis
Connecting Power
Connecting AC Power
To connect AC power, follow these steps:
Step 1
Connect the power supply cords to power 1 and power 2 on the rear panel of the
unit. (See Figure 3-3.)
unit. (See Figure 3-3.)
Figure 3-3
Rear Panel of the Cisco Metro 1500 (AC Version)
Step 2
Connect the ends of the power supply cords to the main power supply source.
Step 3
Turn the power on with the keyswitch at the front panel of the unit. (See
Figure 3-4.)
Figure 3-4.)
Instructions for
power supply
Fan module
Fuse 2
Fuse 1
March 1999
For continued protection against risk of fire replace
only with same type and ratings of fuse.
For proper selection of power supply cord refer to
instruction manual.
only with same type and ratings of fuse.
For proper selection of power supply cord refer to
instruction manual.
Always remove both poewr cords when
disconnecting from a power source.
disconnecting from a power source.
Voltage:
Power Consumption
Fuse: 2
Fuse: 2
115/230 V 50/60 Hz
Max. Current: 2.5 A
max. 100 W
x T 2,5 A / 250 V
Made in Germany
Always remove both
power cords when dis-
connecting from power
source !
power cords when dis-
connecting from power
source !
!
AC Power
connectors
Fuse
holders
Power 2
Power 1
50323