Nilfisk-Advance America GD 930S2 Manuel D’Utilisation

7

a) Loosen the two snap lockings by pulling them  outwards 
b) Lift the cover from the container.

Fit the opening on the dust bag over the air inlet. Press the 

membrane over the flanged edge on the inlet. Secure with 

the lock washer. Use only original dust bags.

Push the hose coupling all the way in and turn clockwise. 

 Standard:  Fit  the  sections  together  and  twist  to  lock  in 

place. 
Telescopic: Push  down the catch and then adjust the length. 

Max.950mm,min.630mm.  

The accessories shown in the pictures may vary from model 

to model.
a-b)Combination nozzle   
Adjust the nozzle according to the requirements of the floor 

you are cleaning. Work with the brush on hard floors and 

without it on soft floors.
c)   Universal nozzle
for both hard floors and carpets.
d)Crevice nozzle 

Use  to  clean  furniture,  radiators  and  others  hard-to-reach 

places.
e)Small combi-nozzle:

The small combi-nozzle combines a dusting brush for furni-

ture, picture frames, mouldings etc. with a fold-out nozzle for 

cleaning curtains, furniture and other soft surfaces. The clip 

on the hose handle holds the nozzle when it is not in use.

The suction control in the hose handle lets you regulate the 

air-flow to prevent the nozzles from fastening to the surfaces 

you are vacuum cleaning. 

a) Foot-operated on/off switch. 
b)On  the  S2  version  a  separate  switch  is  provided  to 

change the motor speed .
c)Plug-in point for powered carpet nozzle. 
Power  is  supplied  to  the  socket  when  the  machine  is 

switched on.

Never  attempt  to  vacuum  liquid,  glass  fragments  or 

ashes!
Wet surfaces can expose the operator to possible 
electrical shock.

The filters are located inside the lid. To reach them lift out 

the filter holder

(a). The standard filter(b) and fine filter (c) 

should  be  inspected  at  regular  intervals,e.g.  when  you 

change  dust  bags,  and  replace  if  necessary.Instead  of 

these two filters you can fit a micro filter of HEPA-quality 

(e), 

wich traps 99,99% of all particles larger than 0,3 microns. 

The machine is also fitted with a backup filter 

(d) located 

above the motor. This filter should also be inspected and 

replaced  if necessary. 

The  GD  930/S2  is  equipped  with  a  specially  

designed cable, which if damaged, must be replaced by 

a cable of the same type. These cables are avaible at 

authorized service shops and must be installed by trained 

personnel.

The GD 930/S2 is equipped with a thermal cut-out to protect 

the motor and other vital machine parts from overheating. 

Should the machine cut out, you will have to wait at least 

5-10 minutes for it to automatically reset. While you are 

waiting, switch the machine off and unplug it, then check 

the hose, dust bag and filters to be sure that nothing is 

blocking the flow of air through the machine.

Remove the plug from the socket before performing service 

or maintenance.

The symbol            on the product or on its packing indicates that this 

product may not be treated as household waste. Instead it shall be 

handed over to the applicable collection point for the recycling of elec-

trical and electronic equipment. By ensuring this product is disposed 

of correctly, you will help prevent potential negative consequences for 

the environment and human health, which could otherwise be caused 

by inappropriate waste handling of this product.  

For more detailed information about recycling of this product, please 

contact your local city office, your household waste disposal service or  

the shop where you purchased the product.

822 9393 000 Instruction for use GD 930 EU.indd   7

2008-06-26   13:06:12