Nilfisk-Advance America GD 930S2 Manuel D’Utilisation

PLEASE READ THESE ESSENTIAL INSTRUCTIONS

(Only applicable to UK)

GD 930/S2 are designed, developed and rigo-

rously tested to function efﬁciently and safely

when properly maintained and used in accor-

dance with the following instructions. These

instructions have been prepared with safety and

efﬁciency paramount.

The MACHINE OPERATOR must be trained

by a suitably qualiﬁed instructor, and be made

aware of the relevant regulations and legislation

currently in force at the time of use.

CAUTION - This machine MUST NOT be used in

explosive or inﬂammable atmospheres or where

such atmospheres are likely to be produced by

the presence of volatile liquid or inﬂammable

gas or vapour.

CAUTION - In no circumstances should the power

supply cord be wrapped around ﬁngers or any

part of the operators person.

CAUTION - The electrical supply plug must not

be subjected to undue stress by pulling on the

power supply cord.

Your MACHINE must only be connected to an elec-

trical supply of the same voltage and frequency as

indicated on the rating plate. Ensure that the plug

ﬁtted to the end of the power supply cord is suitable

for your supply socket, if not refer to the information

contained in 'Electrical Connections', or consult a

qualiﬁed electrician. The electrical installation from

which the supply is drawn must be maintained to

current Institute of Electrical Engineers wiring re-

gulations.

REGULAR SERVICING and INSPECTION of your

machine must be carried out by suitably qualiﬁed

personnel in accordance with relevant legislation

and regulations. In particular, electrical tests for

earth continuity, insulation resistance, and condition

of the ﬂexible cord should be checked frequently.

In the event of any defect the machine MUST be

withdrawn from service, completely checked and

repaired.

Trained Service Engineers will be pleased to carry

out on site servicing on a regular or as requested

basis, to ensure the continuing safety and efﬁciency

of your machine.

822 9393 000 Instruction for use GD 930 EU.indd 8

2008-06-26 13:06:13