Fresco Speaker Manuel D’Utilisation

Required hardware (included):

(6) M4  screws

Required tools (included):

2.5mm Allen tool

1  Prepare a flat surface with padding and sheets to 

protect the speaker as you work on it. Remove the 
Fresco i's grill cloth and carefully place the Fresco i 
face down on the work surface.

2  Using the 6mm Allen tool, loosen the 2 cap nuts (see 

figure 12).

3  Rotate/open the wall bracket away from the cabinet 

bracket (see figure 13).

4  Align the 6 holes in the Fresco i's wall mounting 

bracket with the holes on the back of the Fresco i's 
cabinet. Please note that the wall bracket should lie 
flat against the Fresco i cabinet with the hinges along 
the flat, straight edge of the cabinet (see figure 14).

5  Using the 2.5MM Allen tool, install the 6 screws that 

attach the cabinet bracket and firmly tighten them (see 
figure 15).

Installing the Bracket Assembly

Figure 12. Loose the 2 cap nuts.

Figure 13. Rotate/open the wall bracket away from the cabinet bracket.

Figure 14. Align the 6 holes on the mounting bracket with those of the Fresco 

Figure 15. Install 6 screws.