Fresco Speaker Manuel D’Utilisation

Required hardware (included):

(5) wall anchors
(5) 1" Phillips head wood screws

Required tools (included):

6mm Allen tool

Required tools (not included):

Level
Electric drill and 

1

/

4

" and 

1

/

8

" drill bits

Phillips screwdriver

1  Hold the Fresco i at the mounting location. Examine the 

location to assure the wall is free of obstructions.

 

Test the direction of rotation to assure that the speaker 
can rotate toward your listening position. If the speaker 
rotates away from your listening position, please refer 
to 'Which Direction Should It Rotate?' (page 5) and ‘
Changing the Direction of Rotation’ (page 7).

2  NOTE: These instructions describe the position of the 

wall bracket with the Fresco i mounted flush against a 
wall (not rotated on its bracket).

 NOTE: The center point of the wall-bracket is not the 

same as the center of the Fresco i. These directions 
describe the location of the center of the wall-bracket, 
which you will need to know in order to mount the 
speaker at your desired location.

  Determine where the center point of the wall bracket 

should be marked (see figures 16 and 17).

 

Will the Fresco i remain flat against the wall? If so, 
it can be installed flush against an object such as a 
plasma screen (see figure18).

 

Will the Fresco i be rotated to point towards the 
listening position? If so you need to leave space 
between the nearest object to allow clearance for 
the speaker to pivot (see figure 18). At least 6.75
” (17.2cm) of clearance will allow the Fresco i to 
pivot within its full range of motion. Less space is 
needed if the Fresco i does not need to fully rotate. As 
recommended above, before drilling any holes, hold 
the Fresco i at its desired location and rotate it into 
place to assure you have adequate clearance.

Installing the Fresco i

Figure 16. Determining the wall brackets center point in a vertical installation.

Figure 17. Determining the wall brackets center point in a horizontal 

Counter 

Clockwise

Rotation

Down

Rotation

Up

Rotation

Clockwise

Rotation

Figure 18. Clearance requirements to allow rotation of the Fresco i.