Husqvarna LTH125 Manuel D’Utilisation

Page de 52
19
CUSTOMER RESPONSIBILITIES
MUFFLER
Inspect and replace corroded muffler and spark arrester (if
equipped) as it could create a fire hazard and/or damage.
SPARK PLUGS
Replace  spark  plugs  at  the  beginning  of  each  mowing
season or after every 100 hours of operation, whichever
comes first.  Spark plug type and gap setting are shown in
"PRODUCT SPECIFICATIONS" on page 3 of this manual.
IN-LINE FUEL FILTER  (See Fig. 20)
The fuel filter should be replaced once each season.  If fuel
filter becomes clogged, obstructing fuel flow to carburetor,
replacement is required.
With  engine  cool,  remove  filter  and  plug  fuel  line
sections.
Place new fuel filter in position in fuel line.
Be sure there  are no  fuel line  leaks and  clamps  are
properly positioned.
Immediately wipe up any spilled gasoline.
CLEANING
IMPORTANT:
F O R   B E S T   P E R F O R M A N C E ,   K E E P
MOWER  HOUSING  FREE  OF  BUILD-UP,  GRASS  AND
TRASH.  CLEAN  UNDERSIDE  OF  MOWER  HOUSING
AFTER EACH USE.
Clean engine, battery,  seat, finish, etc.  of  all foreign
matter.
Keep finished surfaces and wheels free of all gasoline,
oil, etc.
Protect painted surfaces with automotive type wax.
We do not recommend using a garden hose to clean your
tractor unless the electrical system, muffler, air filter and
carburetor are covered to keep water out.  Water in engine
can result in a shortened engine life.
CLAMP
CLAMP
ENGINE COOLING FINS (See Fig. 19)
Remove  any  dust,  dirt  or  oil  from  engine  cooling  fins  to
prevent engine damage from overheating.
Remove screws from blower housing and lift housing
and dipstick tube assembly off engine.
Cover oil fill opening to prevent entry of dirt.
Use compressed air or stiff  bristle brush to thoroughly
clean engine cooling fins.
To reassemble, reverse above procedure.
ENGINE COOLING FINS
SPARK
PLUG
AIR SCREEN
SCREWS
BLOWER HOUSING
SCREWS
DIPSTICK TUBE
ASSEMBLY
FIG. 19
FIG. 20
FUEL FILTER