Metrologic Instruments MS1690 Focus Manuel D’Utilisation

 

 

5

I

NTRODUCTION

 

 

 

 

Important:   If the PowerLink cable is not fully ‘latched’ the unit can 

power intermittently. 

 

 

 

 
 
Disconnecting 
 
Before removing the cable from the scanner, Metrologic recommends that the 
power on the host system is off and the power supply has been disconnected 
from the PowerLink cable. 

 

 

 
1.  Locate the small ‘pin-hole’ on the handle of the unit near the cable. 
 
2.  Bend an ordinary paperclip into the shape shown above. 
 
3.  Insert the paperclip (or other small metallic pin) into the small ‘pin-hole’.  
 
4.  There will be a faint ‘click’ when the lock is released.  Pull gently on the 

strain-relief of the PowerLink cable to remove the cable from the unit.