Metrologic Instruments MS1690 Focus Manuel D’Utilisation

 

 

6 

I

NTRODUCTION

 

 

 
Each scanner has a label located on the underside of the head.  This label 
provides the unit’s model number, date of manufacture, serial number, CE and 
caution information.  The following figure gives an example of the label and its 
location. 
 

 

Caution:  
To maintain compliance with applicable standards, all circuits connected to the scanner must 
meet the requirements for SELV (Safety Extra Low Voltage) according to EN/IEC 60950-1.  

 

To maintain compliance with standard CSA-C22.2 No. 60950-1/UL 60950-1 and norm EN/IEC 
60950-1, the power source should meet applicable performance requirements for a limited 
power source. 

 
 
 
 
 

 

 
Smudges and dirt on the unit's window can interfere with the unit's performance.  
If the window requires cleaning, use only a mild glass cleaner containing no 
ammonia.  When cleaning the window, spray the cleaner onto a lint free, non-
abrasive cleaning cloth then gently wipe the window clean. 

 

If the unit's case requires cleaning, use a mild cleaning agent that does not 
contain strong oxidizing chemicals.  Strong cleaning agents may discolor or 
damage the unit's exterior.