Emerson MVME2500 Manuel D’Utilisation

MVME2500 Installation and Use (6806800L01H)

30

The MVME2500 does not support hot swap. Remove power to the rear slot or system before 
installing the module. A PCMI/O Module (PIM) needs to be manually configured and installed 
before placing the transition module.

1. Turn OFF all equipment and disconnect the power cable from the AC power source.

2. Remove the chassis cover.

3. Remove the filler panel(s) from the appropriate card slot(s) at the rear of the chassis (if the 

chassis has a rear card cage).

Damage of Circuits



Electrostatic discharge and incorrect installation and removal can damage circuits or 
shorten its life.



Before touching the board or electronic components, make sure that you are working 
in an ESD-safe environment. 

Product Damage



Only use injector handles for board insertion to avoid damage to the front panel and/or 
PCB. Deformation of the front panel can cause an electrical short or other board 
malfunction.

Board Malfunction



Switches marked as “reserved” might carry production-related functions and can cause 
the board to malfunction if their setting is changed.



Do not change settings of switches marked as “reserved”. The setting of switches which 
are not marked as “reserved” has to be checked and changed before board installation.