Nvidia N61V Manuel D’Utilisation

- -

 nVIDIA N61P/N61S/N61V                                                                             User's /Manual

    Before installing the CPU, please comply with the following conditions:

    1. Please make sure that the mainboard supports the CPU.

    2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong     

       direction, the CPU will not insert properly. If this occurs, please change the insert direction      

       of the CPU.

    3. Please add an even layer of heat sink paste between the CPU and CPU cooler.

    4. Please make sure the CPU cooler is installed on the CPU prior to system use, otherwise 

        overheating and permanent damage of the CPU may occur.

    5. Please set the CPU host frequency in accordance with the processor specifications. It is not 

        recommended that the system bus frequency be set beyond hardware specifications since 

        it does not meet the required standards for the peripherals. If you wish to set the frequen-     

        cy beyond the proper specifications, please do so according to your hardware     

        specifications including the CPU, graphics card, memory, hard drive, etc.

    2.3.1 Installation of the CPU

1. Unlock the socket by pressing the 

   lever sideways, then lift it up to a 90

o

.

2. Position the CPU above the socket such 

    that the CPU corner with the gold 

    triangle matches the socket corner with 

    a small triangle.

3. Carefully insert the CPU into the socket 

    until it fits place.

4. When the CPU is in place, push down 

   the socket lever to secure the CPU. 

   The lever clicks on the side tab to 

   indicate that it is locked.