Nvidia N61V Manuel D’Utilisation

- 11 -

 nVIDIA N61P/N61S/N61V                                                                             User's /Manual

    2.5.1 Floppy and IDE Disk Drive Connectors

    The FDD connector connects up to two floppy drives with a 34-wire, 2-connector floppy 

    cable.Connect the single end at the longer length of ribbon cable to the FDD on the board, 

    the two connectors on the other end to the floppy disk drives connector. Generally you need 

    only one floppy disk drive in your system.

    2.5.2 Serial ATA Connectors

      Each SATA connector serves as one single channel to connect one SATA device by SATA 

      cable.

    

   

    2.5.3 PCI and PCI Express slots

      Install PCI Express X16 graphics card into slot “PCIEXP1”. 

      Install PCI Experess X1 card into slot "PCIE". (for nVIDIA N61(V2.0) only)

      Install PCI cards into slots “PCI1” and/or “PCI2”.

Each  of  the  IDE  port  connects  up  to 

two  IDE  drives  at  Ultra  ATA  66/100/133 

mode  by  one  40-pin,  80-conductor,and 

3-connector Ultra ATA/66 ribbon cables.

Connect  the  single  end  (blue  connector) 

at  the  longer  length  of  ribbon  cable  to 

the IDE port of this board, the other two 

ends  (gray  and  black  connector)  at  the 

shorter length of the ribbon cable to the 

connectors of your hard drives.