Emerson ATCA-9305 Manuel D’Utilisation
System Management:
Vendor Commands
7-34
Bused Resource
To send a Bused Resource command to the carrier controller, the payload uses the Bused
Resource command of the SIPL.
Resource command of the SIPL.
Table 7-32:
Bused Resource Command
Bused Resource Status
If the IPMC receives a Bused Resource command from IPMB-0, it asserts an appropriate
event and notifies the payload which uses the Bused Resource Status command over the
SIPL. When the IPMC receives a Bused Resource Status command, the respective bit in the
IPMC status is cleared.
event and notifies the payload which uses the Bused Resource Status command over the
SIPL. When the IPMC receives a Bused Resource Status command, the respective bit in the
IPMC status is cleared.
The payload must issue a Bused Resource Status command before the payload communica-
tion time-out time. If the payload does not issue such a command before the payload com-
munication time-out time, the IPMC sends the 0xC3 completion code (Time-Out) in the
appropriate Bused Resource command reply.
tion time-out time. If the payload does not issue such a command before the payload com-
munication time-out time, the IPMC sends the 0xC3 completion code (Time-Out) in the
appropriate Bused Resource command reply.
Type:
Byte:
Data Field:
Request Data
1:3
PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
4
Command Types for Carrier Controller to Board
0 Query if board has control of the bus
1 Release requests a board to release control of the bus
2 Force board to release control of bus immediately
3 Bus Free informs board that the bus is available
1 Release requests a board to release control of the bus
2 Force board to release control of bus immediately
3 Bus Free informs board that the bus is available
Command Types for Board to Carrier Controller
0 Request to seize control of the bus
1 Relinquish control of the bus, carrier controller can reassign
control of bus
2 Notify carrier controller that control of the bused resource has
been transferred to this board from another authorized board
1 Relinquish control of the bus, carrier controller can reassign
control of bus
2 Notify carrier controller that control of the bused resource has
been transferred to this board from another authorized board
5
Bused Resource ID
0 Metallic Test Bus pair #1
1 Metallic Test Bus pair #2
2 Synch clock group 1 (CLK1A and CLK1B pairs)
3 Synch clock group 2 (CLK2A and CLK2B pairs)
3 Synch clock group 3 (CLK3A and CLK3B pairs)
1 Metallic Test Bus pair #2
2 Synch clock group 1 (CLK1A and CLK1B pairs)
3 Synch clock group 2 (CLK2A and CLK2B pairs)
3 Synch clock group 3 (CLK3A and CLK3B pairs)
Response Data
1
Completion Code
2:4
PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
5
Status
0 Ack; carrier controller acknowledges that board has control
1 Error; same as Ack, but carrier controller believes board should
not have been given control of the resource (optional)
2 Deny; carrier controller denies control of resource by the board
1 Error; same as Ack, but carrier controller believes board should
not have been given control of the resource (optional)
2 Deny; carrier controller denies control of resource by the board