Q-Logic 8200 Manuel D’Utilisation

6–iSCSI Noninteractive Commands
-pdt

6-20

SN0054667-00  C

This command is not active for the PPC.

For information on secondary boot code, see 

To disable a target, issue the -pdt command as follows:

-pdt <hba_port_inst> <targetId>

To enable a target, issue the -pet command as follows:

-pet <hba_port_inst> <targetId>

To view port information for the specified adapter, issue the -pinfo command as 

follows:

-pinfo <hba_port_inst>

To ping the target device, issue the -ping command as follows:

-ping <hba_port_inst> <IP Address> <Ping Count> <Packet size> 
<IPv6 source address>

The following provides the IPv6 source address

values:

Where:

0 = Do not care
1 = Local link
2 = Address 0
3 = Address 1

hba_port_inst = The adapter port that sends the ping

IP Address = The IP address to ping

Ping Count = The number of ping packets you want (1–[2

31

]).

Packet Size = The size of the ping packet 0–64kB

IPv6 Source Address = Origin device