Q-Logic 8200 Manuel D’Utilisation

6–iSCSI Noninteractive Commands

-ps

SN0054667-00  C

6-21

To view persistent targets for the adapter port, issue the -ps command as follows:

-ps <hba_port_inst> [Target ID]

If you do not specify the [Target ID], QConvergeConsole CLI lists all targets 

for the specified adapter port number. If you do not specify the port instance 
[hba_port_inst]

 

or the target ID, [Target ID],

 

QConvergeConsole CLI lists 

all target IDs for all adapter ports in the system.

To unbind a persistent target, issue the -pu command as follows:

-pu <hba_port_inst> <Target ID>

To unbind all persistent targets on the adapter, issue the -px command as 

follows:

-px <hba_port_inst>

Be sure to select Save changes and reset HBA afterwards; otherwise, the 
changes do not take effect.

Type the following command to update the specified adapter’s ROM:

-r <hba_port_inst> <file_name>

The <hba_port_inst> parameter is the adapter instance to update. The 
<file_name> parameter indicates the file containing the ROM image to upload.



Before attempting to update the ROM image, contact QLogic Customer 
Support.



Before updating the ROM image, ensure that no I/O processes are 
running.



An administrator must take necessary actions to ensure changes are 
fully recognized by the operating system (reboot, flush cache, sync disk, 
and so forth). 



A ROM update and reset are performed that requires that all applications 
accessing impacted LUNs must be shut down.



Any impacted systems must be unmounted.