Brother T76 Manuel D’Utilisation

   Chapter 11

Your machine comes set to receive voice messages up to 35 seconds long. You can change this 
setting to any length from 35 seconds to 60 seconds, from 20 seconds to 60 seconds (for Ireland), in 
5-second increments.

Press 

,

,

. The screen prompts you to select a maximum time.

Press 

 or 

 to select the maximum time setting for incoming messages, and press 

 

when the screen displays your setting.

Press 

 to exit.

When you set the Toll Saver feature, the machine answers after 4 rings if you don’t have messages, 
and after 2 rings if you do have messages. This way, when you call the machine, if it rings 3 times, 
you know you have no messages, and can hang up, avoiding any toll charge. 

Press 

, 

, 

.

Press 

 or 

 to select TOLL SAVER (or RING DELAY), and press 

 when the 

screen displays your selection.

Press 

 or 

 to select ON (or OFF), and press 

.

Press 

 to exit.

This feature lets you turn OFF (or ON) the speaker volume for voice messages. When you turn the 
monitor OFF, you will not hear messages as they come in.

Press 

, 

, 

.

Press 

 or 

 to select OFF (or ON), and press 

 when the screen displays your 

selection.

Press 

 to exit.

You can record a telephone conversation by pressing 

 during the conversation. Your 

recording can be as long as the Incoming Message Maximum Time. You and the other party will 
hear a beep every 15 seconds while recording. You cannot record a conversation using the 
Speakerphone.

When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver must be 
off for the machine to operate using your Ring Delay setting. 

Ring Delay” on page 25.