GE 23954 Manuel D’Utilisation

2.2.9  Trap command group 

The trap command group allows to configure the trap sending functionality. With SNMP traps various 
systems can be notified in case of UPS events and alarms.  
 
 

 

Show detailed trap configuration 

on | off 

Enable/disable send trap [RFC1628] function 
on  

Trap sending enabled 

off  

Trap sending disabled 

Enable/disable send trap [GE-MIB] function 
on  

Trap sending enabled 

off  

Trap sending disabled 

on | off 

NOTE: 3-ph version ONLY  

[X.X.X.X] 
v1 | v2 
[community]  
[port] 

Add a trap address 
[X.X.X.X] 

IP-address of the trap target 

v1 | v2 

SNMP version  

 

(optional – default: v1) 

[community] community 

name 

 

 

(optional – default: public) 

[port] 

port to which the trap will be sent  

 

(optional – default 162) 

NOTE: Maximum 20 recipients can be defined. 

Delete a trap address 
[X.X.X.X] 

IP-address of the trap target 

[X.X.X.X] 

 

Modifications reserved 

Page 22/58 

OPM_CNT_SNM_BAS_CRD_1GB_V012.doc 

Operating Manual SNMP/Web Adapter