Emerson MONITORING OpenComms Manuel D’Utilisation

the Enter key on your keyboard. This will initiate 

communications with the card and the following screen should be 

displayed.

(You can also cycle power on the OpenComms NIC card. This will 

also initiate communications and provide information on current 

revision status.)

6. When the message “Initializing Network…” appears, hit the 

Enter key on your keyboard. (Additional network information 

may appear)

 Cycling power on either the 7200 or the HiPulse UPS is not 

recommended unless the unit is in bypass mode. Consult the 

UPS user manual for further instructions.