Emerson FPC Manuel D’Utilisation

A detailed internal inspection should be performed after the unit is in place and before it is ener-

gized, to ensure trouble free startup. The same internal inspection should be carried out when per-

forming preventive maintenance.

Open the unit - Gain access to the internal components of the Liebert FPC unit by removing the 

exterior panels and internal accent panels.
Visually inspect - Be sure wiring and components are not damaged.
Check power connections - Check all power connections for tightness. Refer to Tables 11 

through 14 for torque requirements of all electrical connections.
Perform formal detailed inspection - Follow the procedures described in 3.0 - Inspection and 

Start-Up Checklist when performing detailed inspection.

Follow the detailed step-by-step checklist (3.0 - Inspection and Startup Checklist) when installing 

and starting up the Liebert FPC.

A qualified electrician must be employed to perform the equipment inspection and startup. Liebert 

system startup may be arranged by calling your local Liebert sales representative or Liebert Global 

Services. In the United States, call 1-800-LIEBERT.

A copy of the appropriate checklist (furnished with the equipment) must be completed, signed, dated 

and returned to Liebert Corporation. Warranty coverage of the equipment is not effective unless the 

checklist has been received by the factory.

Verify that all incoming line voltage (power) and low-voltage (control) circuits are

de-energized and locked out before performing the internal inspection.

Equipment inspection and startup should be performed only by trained personnel. Hazardous 

voltages are present during startup procedures.
Electrical safety precautions must be followed throughout inspection and startup.