Emerson ITR Manuel D’Utilisation

The chilled water cooling coil is designed for closed-loop applications using properly maintained 

water. It is constructed of copper tubes and aluminum fins. To ensure quality, the V-frame coil is 

manufactured to the highest standards in the industry.

The flow of chilled water through the cooling coil is controlled by an electronic modulating motor. The 

microprocessor control will activate the motor when a need for cooling or dehumidification exists. The 

motor will position the valve to precisely match the needs of the conditioned space.

All chilled water piping within the Liebert Challenger ITR is fully insulated to assure full system 

capacity and prevent condensation.

The fully insulated control valve gives the conditioned space the precise cooling needed by electronic 

equipment. Its unique design requires no overtravel linkages and never requires adjustment.

The flow switch will activate the alarm system and/or shut down the system should the chilled water 

supply be interrupted. The switch is factory wired and mounted in the chilled water valve compart-

ment.

For special applications, a high-pressure, modulating three-way or two-way valve can be provided. 

The valve is designed for 400 psig (2758 kPa) water pressure.