Emerson IS-WEB485ADPT Manuel D’Utilisation

To access configuration using the Web interface:
1. Open a Web browser such as Internet Explorer, then enter 

the IP address or hostname of the Web card in the address 

bar—e.g., http://192.168.0.125.

2. Click on the Configure tab, shown at right. Configuration 

Categories appear in the left panel, organized with folder 

icons.

3. Click on any configuration category, and the Connect To 

box opens.

4. Enter the Administrator username and password (both 

case-sensitive):
a. User Name (default is Liebert)
b. Password (default is Liebert)

5. Click OK.
6. Refer to 3.1 - Guide to Configuration for details on each 

function.

7. After making changes, click the Save button, then click on 

Reinitialize to reboot the Web card and put your changes 

into effect (see 3.6 - Saving Changes and 

Follow the applicable steps for your interface to save configuration changes and reinitialize the Web 

card. Changes will not take effect until these steps are completed.

• After each change is made, a reminder appears (shown at right).
• Return to the Main Menu, then choose Exit and Save. A mes-

sage appears and remains until the card is reinitialized, followed 

by a message that the process was successful.

• After making each change, click the Save button. A reminder 

appears each time you make a change (shown at right).

• Without leaving the Configure tab window (below left), click 

Reinitialize in the left panel, then click the Reinitialize button 

at right to reboot the Web card and put your changes into effect.

• A message window appears, shown above right, and remains until the card is reinitialized.

NOTE
For security, change the default username and 

password (see 5.7 - Change Username / Password). 

New Settings will take effect

when saved

GO TO MAIN MENU AND DO 'EXIT AND

SAVE' TO SAVE YOUR CHANGES!

Exiting and saving...

Configuration saved successfully