Emerson IS-WEB485ADPT Manuel D’Utilisation
Network Settings
12
5.0
N
ETWORK
S
ETTINGS
The IP Network Settings Menu is used to enable network
communications with the Web card.
Refer to the following sections for detailed step-by-step
Refer to the following sections for detailed step-by-step
instructions on each item from this menu:
Table 8
Table 8
Network Settings menu guide
Menu item
Refer to:
IP Network Settings Menu
-------------------------
1: Boot/IP Settings
2: Domain Name Server (DNS) Settings
3: Management Protocol
4: Web Server
5: Telnet Server
6: Time (SNTP)
7. Change Administrator Username/Password
8: Change General Username/Password
9: Reset Authentication to Factory
-------------------------
1: Boot/IP Settings
2: Domain Name Server (DNS) Settings
3: Management Protocol
4: Web Server
5: Telnet Server
6: Time (SNTP)
7. Change Administrator Username/Password
8: Change General Username/Password
9: Reset Authentication to Factory
Defaults
<ESC>: Cancel menu level
Please select a key ?>
Please select a key ?>