Emerson IS-WEB485ADPT Manuel D’Utilisation
System Information
11
4.0
S
YSTEM
I
NFORMATION
System Information is optional and identifies the Liebert unit, its
location, a contact person and other information about the unit. The
default value of each field is “Uninitialized.”
Terminal Emulation (Serial or TCP/IP Connection) / Telnet
To edit any field in this category:
1. From the Main Menu, choose System Information.
2. Enter the number that corresponds to your choice, then enter the identifying information, using
1. From the Main Menu, choose System Information.
2. Enter the number that corresponds to your choice, then enter the identifying information, using
the following as a guide.
Web Interface
To access System Information through the Web interface:
• Click on the Configure tab, then Agent Info in the left panel and finally Edit in the right panel.
After making changes, click Save.
NOTE
This information also configures the SNMP parameters
This information also configures the SNMP parameters
sysName, sysContact, sysDescr, and sysLocation available
using RFC-1213 MIB II.
Table 7
System information identifiers
Item
Description
Maximum Length
Name
A name for the Liebert unit
255 characters*
Contact
A contact person or department responsible
for maintenance and operation of the Liebert unit
64 characters*
Location
The location of the Liebert unit
64 characters*
Description
Other useful information about the unit
for quick reference
64 characters*
* Valid characters include spaces and other printable characters except double quotes (").
System Information Menu
------------------------
1: Name Uninitialized
2: Contact Uninitialized
3: Location Uninitialized
4: Description Uninitialized
------------------------
1: Name Uninitialized
2: Contact Uninitialized
3: Location Uninitialized
4: Description Uninitialized
<ESC>: Cancel menu level
Please select a key ?>
Agent
Info
Edit
Configure tab