Emerson IS-WEB485ADPT Manuel D’Utilisation

To install the firmware upgrade, choose one of these three methods and refer to the associated step-

by-step directions:

• HTTP (Web) - see A.4 - Updating the Firmware - HTTP (Web) Method
• TFTP - see A.5 - Updating the Firmware - TFTP (HyperTerminal, Telnet, Web) Method
• Xmodem (Serial) - see A.6 - Updating the Firmware - Xmodem (Serial) Method

Follow these steps to install the firmware upgrade using the HTTP (Web) method. This method is 

available through the Web interface only and requires an Ethernet connection to the Web card.

To update the Liebert IntelliSlot card firmware using the HTTP (Web) method:
1. Open a connection to the Liebert IntelliSlot card (if needed, see instructions in A.2.4 - Open the 

2. Click on the Configure tab, then click on Web (under Firmware Update) in the left panel. The 

Connect To box opens for you to enter the username and password.

3. Enter the Administrator username and password (both case-sensitive):

a. User Name (default is Liebert)
b. Password (default is Liebert)

4. Click OK. The Web (HTTP) Firmware Update window opens, as shown at right below.

5. Click on the Browse button to locate the upgrade file. This is the file with the extension “.bin” 

downloaded in A.3.3 - Download the Firmware Upgrade File to the Computer. Then click 

Open to return to the update screen.

6. When ready to begin the update, click the Update Firmware button.

A screen will appear, showing the firmware update progress.

7. A message appears indicating whether the update was successful.
After the firmware update is completed, the card will reinitialize and you may return to the Liebert 

IntelliSlot card’s Web interface.
Check the new firmware version if you wish (see A.3.2 - Determine the Liebert IntelliSlot Card 

Type and Firmware Version).

NOTE
Turn off the power management on your PC or laptop before beginning the update to ensure 

NOTE
Do not refresh your browser or open another browser window. Wait until the firmware update