Emerson IS-WEB485ADPT Manuel D’Utilisation

Follow these steps to update the firmware using the TFTP method. This method is available through 

the terminal emulation, Telnet and Web interfaces with an Ethernet connection to the Web card.

To update the Liebert IntelliSlot card firmware using the TFTP method with a terminal emulation or 

Telnet interface:

1. Open a terminal emulation or Telnet connection to the Liebert IntelliSlot card (if needed, see 

instructions in A.2.2 - Open the Terminal Emulation Interface - TCP/IP Connection or 

2. Choose Firmware Updates from the Main Menu.
3. Choose TFTP Update from the Firmware Updates menu, 

shown at right.

4. The TFTP Update Menu, shown at right, displays the TFTP 

server’s IP address and listening port, along with the name 

of the firmware update file.

5. Select options as needed and refer to the following guide to 

change any settings.

6. After making changes, press the Escape key twice to return to the Main Menu.
7. Choose Exit and Save to save your changes and reboot the card.

8. Connect to the Liebert IntelliSlot card again (if needed, see A.2.3 - Open the Telnet Interface 

9. Choose Firmware Updates from the Main Menu.
10. Choose TFTP Update from the Firmware Updates menu, 

shown at right.

NOTE
This method includes a time-sensitive operation requiring expeditious location of the upgrade 

The IP address of the TFTP server—for example, 192.168.0.125.

Port that the TFTP server is using, typically 69.

Name of the firmware update file—128 characters maximum, including spaces and punctuation.

This is the file with the extension “.bin” downloaded in A.3.3 - Download the Firmware Upgrade 

Firmware Updates Menu
----------------------
1: TFTP Update

TFTP Update Menu
-----------------
1: IP Address

0.0.0.0

2: Port

69

3: Filename

Uninitialized

4: Initiate TFTP Firmware Update

<ESC>: Cancel menu level

Please select a key ?>

Firmware Updates Menu
----------------------
1: TFTP Update