Emerson IS-WEB485ADPT Manuel D’Utilisation

11. When ready to begin the update, choose 

Initiate TFTP Firmware Update. 

12. Open the TFTP application and start 

TFTP. Ensure that all settings are ready 

to transfer the file, including the 

location of the upgrade file. Refer to your 

TFTP user manual for more details.

13. Return to the terminal emulation/Telnet 

screen. At the confirmation message 

prompt, enter y (yes) to confirm your 

choice. (To cancel, enter n for no.)

14. A message appears, as shown at right, 

showing the progress by percent 

complete.

15. When the progress screen shows 100% 

complete, the card will be rebooted. 

Press Enter when this is finished.

16. Press the Escape key to return to the 

Main Menu, then choose Exit and 

Save. 

The upgrade is now complete.
Check the new firmware version if you 

wish (see A.3.2 - Determine the Liebert 

Version).

To update the Liebert IntelliSlot card firmware using the TFTP method with a Web interface:

1. Open a connection to the Liebert IntelliSlot card (if needed, see instructions in A.2.4 - Open the 

2. Click on the Configure tab, then TFTP in the left panel.

3. Enter the Administrator username and password (both are case-sensitive):

a. Login (username—default is Liebert)
b. Password (default is Liebert)

TFTP Update Menu
-----------------
1: IP Address 192.168.0.125
2: Port

69

3: Filename

OCWEBCARD_HID3_2.300.0_035780_AppFwUpdt.bin

4: Initiate TFTP Firmware Update

<ESC>: Cancel menu level

Please select a key ?>

All Code In Flash Will Be Rewritten, Confirm? [y/n]

TFTP Update initiated

The firmware on this card is currently being updated.
This operation may take 6 or more minutes depending
on network traffic and other factors.  The card will be
rebooted upon successful completion of the process OR
control will be returned to this terminal session upon
failure so another firmware update attempt can be made.

Firmware update in process... Percent Complete(0%)

Main Menu
----------
1: System Information
2: IP Network Settings
3: Messaging
4: Factory Settings
5: Firmware Updates
q: Quit and abort changes
x: Exit and save
Please select a key ?>