RAD Data comm ASMi-52 Manuel D’Utilisation

Installation and Operation Manual

Chapter 4 Configuration

ASMi-52 Ver. 2.5

Configuring the Physical Ports

4-29

ASMi-52

E1 Local Port
1. Framed mode

(G732N)

2. Sync mode

(CCITT(complies with G732))

3. CRC-4

(NO)

4. Idle code

(ff)

5. Time slots assign
6. Unit Identical Set

(Yes)

7. Number TS for remote E1
8. Save

ESC-prev. menu; !-main menu; &-exit; @-scroll

Figure 4-32. E1 Local Port Menu

ASMi-52

E1 Remote Port
Framed mode

(G732N)

Sync mode

(CCITT (complies with G732))

CRC-4 (NO)
Idle code

(ff)

1. Time slots assign
2. Save

ESC-prev. menu; !-main menu; &-exit; @-scroll

Figure 4-33. E1 Remote Port Menu

Selecting E1 Framing Mode

• The Framing mode is configurable if one of the conditions below is fulfilled.

If the local ASMi-52 is configured as CO,
if the local ASMi-52 is configured as CPE and the remote is not an E1 modem.

• The remote ASMi-52 is configurable if the local is configured as CO and is not an

E1 modem

• If Frame Mode is Unframed, then the remaining E1 parameters are disabled.

To select E1 framing mode:
1. From the E1 Local Port menu, select Framed Mode (Main menu >

Configuration > E1 Configuration > E1 Local Port > Framed Mode).

The Framed Mode menu appears (see

Figure 4-34

2. From the Framed Mode menu, select Unframed, G732N, or G732S

transparent

The E1 Local Port menu appears.

3. Save the changes.

Notes