ZyXEL Communications 642R Series Manuel D’Utilisation
Prestige 642R Series ADSL Router
6-4
IPX Configuration
6.3 IPX Ethernet Setup
From Menu 3 – Ethernet Setup, select option 3 to got to Menu 3.3 - Novell IPX Ethernet Setup as
shown in Figure 6-3.
shown in Figure 6-3.
Figure 6-3
Menu 3.3 - Novell IPX Ethernet Setup
The following describes the Novell IPX Ethernet Setup menu.
Table 6-1
Novell IPX Ethernet Setup Fields
FIELD
DESCRIPTION
OPTIONS
Seed Router
Determines if your Prestige is to act as a seed router.
Yes or No
Frame Type
Enable/Disable the individual frame type.
Remember to enable only the ones that are actually used on your
network.
Remember to enable only the ones that are actually used on your
network.
802.2
802.3
802.3
Ethernet II
SNAP
IPX Network
#
#
If your Prestige is a seed router, enter a unique network number for each
frame type enabled.
frame type enabled.
Press [ENTER] at the message [Press ENTER to Confirm . . . ] to save your configuration, or press
[ESC] at any time to cancel.
[ESC] at any time to cancel.
Menu 3.3 - Novell IPX Ethernet Setup
Seed Router= No
Frame Type 802.2= Yes
IPX Network #= N/A
Frame Type 802.3= No
IPX Network #= N/A
Frame Type Ethernet II= No
IPX Network #= N/A
Frame Type SNAP= No
IPX Network #= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.