ZyXEL Communications 642R Series Manuel D’Utilisation

6-6

Follow the procedure in Chapter 5 to configure the protocol-independent parameters in Menu 11.1 –
Remote Node Profile.  For the IPX-related parameters in Menu 11.3 – Remote Node Network Layer
Options, follow the instructions below.

To edit Menu 11.3 – Remote Node Network Layer Options shown in Figure 6-5, follow these steps:

Step 1. In Menu 11.1, make sure IPX is among the protocols in the Route field. (The Route field should

display Route= IPX, or IP + IPX.)

Step 2. Move the cursor to the Edit IP/IPX/Bridge field, then press the [space bar] to set the value to

Yes, and press [Enter]

 

to open Menu 11.3 – Remote Node Network Layer Options.

            Menu 11.3 - Remote Node Network Layer Options

VPI/VCI (LLC-mux or PPP/PPPoE) Encap:
    VPI #= 0
    VCI #= 35
IP Options:
    Rem IP Addr: N/A
  Rem Subnet Mask= N/A
  My WAN Addr= N/A
  Single User Account= N/A
  Metric= N/A
  Private= N/A
  RIP Direction= N/A
    Version= N/A
  Multicast= N/A
  IP Policies= N/A

IPX Options:

Rem LAN Net #= 00000000
My WAN Net #= 00000000
Hop Count= 1
Tick Count= 2

  W/D Spoofing(min)= N/A
  SAP/RIP Timeout(min)= N/A

Dial-On-Query= N/A

Bridge Options:
  Dial-On-Broadcast= N/A

Ethernet Addr Timeout(min)= N/A

Enter here to CONFIRM or ESC to CANCEL: