Canon WUX400ST Manuel D’Utilisation
Installation-Related Menu Settings
152
Specifying the Fan
Mode
> [Install settings] > [Professional
settings] >
[Fan mode]
Enable suitable cooling by switching
the fan mode to the setting for low-
or high-altitude (above 2,300 m
(7,545.8')) operation.
the fan mode to the setting for low-
or high-altitude (above 2,300 m
(7,545.8')) operation.
When the setting is completed, press
the OK button to accept your setting
and then press the MENU button or
EXIT button.
the OK button to accept your setting
and then press the MENU button or
EXIT button.
• [Normal] is the factory default.
Specifying Vertical
Projection
> [Install settings] > [Professional
settings] >
[Vertical projection]
You can ensure adequate cooling by
switching the fan mode to suit
upward- or downward-facing
installations.
switching the fan mode to suit
upward- or downward-facing
installations.
When the setting is completed, press
the OK button to accept your setting
and then press the MENU button or
EXIT button.
the OK button to accept your setting
and then press the MENU button or
EXIT button.
• [Off] is the factory default.
HDMI
Component
LAN
Digital PC
Analog PC
USB
Normal
Setting for use in altitudes
lower than 2,300 m (7,545.8').
lower than 2,300 m (7,545.8').
High
altitude
altitude
Setting for use in altitudes of
2,300 m (7,545.8') or higher.
2,300 m (7,545.8') or higher.
Incorrect settings may shorten the
useful life of the lamp or other parts.
useful life of the lamp or other parts.
HDMI
Component
LAN
Digital PC
Analog PC
USB
Off
Does not alter the fan mode.
Upward
Setting for use when the
projector faces upward
projector faces upward
Downward Setting for use when the
projector faces downward
Even if you complete this setting,
vertical projection will result in a
shorter useful life of the lamp and other
parts than horizontal projection.
vertical projection will result in a
shorter useful life of the lamp and other
parts than horizontal projection.