Manualsbrain.com
  1. Manuels
  2. Marques
  3. Canon
  4. WUX400ST
  5. Manuel D’Utilisation

Canon WUX400ST Manuel D’Utilisation

Télécharger
Page de 314
Installation-Related Menu Settings
153
Inst
alla
tio
n
 an
d Main
te
nan
ce
Inst
allation
Selecting the Audio In 
Terminal
> [Install settings] >
 [Audio in 
terminal select]
You can select the audio in terminal 
that is used for each input signal 
(HDMI, Digital PC, Analog PC-1, 
Analog PC-2, Component).
Press the OK button to accept your 
setting and then press the MENU 
button or EXIT button.
• The factory default is as follows.
HDMI [HDMI]
Digital PC [Audio in 1]
Analog PC-1 [Audio in 1]
Analog PC-2 [Audio in 2]
Component [Audio in 2]
Adjusting Colors to 
Suit the Screen Color
> [Install settings] >
 [Screen color]
You can adjust the color quality of 
the images projected according to 
the color of the projection screen.
Press the OK button to accept your 
setting and then press the MENU 
button or EXIT button.
• [Normal] is the factory default.
HDMI
Component
LAN
Digital PC
Analog PC
USB
Off
No audio is output.
Audio in 
1
Outputs the audio signal that is 
inputted in Audio in terminal 1.
Audio in 
2
Outputs the audio signal that is 
inputted in Audio in terminal 2.
HDMI
Outputs the HDMI audio signal. 
(Only for HDMI)
HDMI
Component
LAN
Digital PC
Analog PC
USB
Normal Select this if a standard type of 
projection screen is used. The 
images are projected in a light 
quality similar to that of natural 
light.
Greenboard Select this if a greenboard (dark 
green color) is used for the 
projection screen. The color quality 
similar to [Normal] is obtained on 
the greenboard.
Adjust Select this to make detailed 
adjustment.
The following popup screen will 
appear.
Press the [ ] / [ ] buttons to 
select a color.
[ ] makes the color selected 
darker.
[ ] makes the color selected 
lighter.