Canon LV-7295 Manuel D'Instructions
30
Choose either
COMPUTER 1 (ANALOG PC) or COMPUTER 2 (ANALOG PC) by pressing the COMPUTER 1 or
COMPUTER button on the remote control unit.
Before using these buttons, correct input source should be selected through Menu operation as described below.
1
Input Menu
2
3
Note:
When the Auto input function is set to
On 1
or
On 2 in the Auto setup function, the input
signal will be searched automatically (p.5).
COMPUTER 1
Remote control unit
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select
Input
and then press the Point ► or the OK button.
Use the Point ▲▼ buttons to select
COMPUTER 1.
When
COMPUTER 1 is selected, press the Point
► button to access the submenu items. Use the
Point ▲▼ buttons to select the
ANALOG PC
input source and then press the OK button.
COMPUTER 1(SCART)
Input Source Selection (ANALOG PC: COMPUTER 1/COMPUTER 2)
COMPUTER 2 (ANALOG PC)
Direct Operation
Menu Operation
Computer Input
OR
Use the Point ▲▼ buttons to select
COMPUTER 2
and then press the OK button.
COMPUTER 1 button
COMPUTER 2 button
COMPUTER 1 (ANALOG PC)